February 19, 2013 – Fluke Calibration, a leader in precision calibration instrumentation and software, introduces the 9190A Ultra-Cool Field Metrology Well, a small, lightweight, and accurate dry-block calibrator with best-in-class stability.
The 9190A is ideal for pharmaceutical, biomedical and food processing applications that demand strict quality control and regulatory process compliance. This includes on-location validation and calibration of RTDs, thermocouples, thermometers and other temperature sensors.
The 9190A conforms to EURAMET cg-13 guidelines for best measurement practices for temperature dry-block calibrators. This means its specifications for accuracy, stability, axial (vertical) uniformity, radial (well-to-well) uniformity, loading and hysteresis have been thoroughly and carefully defined and tested.
The 9190A has a wide temperature range (-95 to 140 degrees Celsius) to cover the coldest and warmest temperatures required in pharmaceutical, biomedical and food processing applications. Operating at ultra-cold temperatures is not typically available with a calibration bath. The 9190A uses no bath fluids, which keeps clean rooms clean, makes it easier to transport and delivers faster heating/cooling rates. It offers best-in-class temperature stability (plus-or-minus 0.015 degrees Celsius) for consistent and accurate results.
The 9190A with “process” option features 4-20 mA connectors, a reference thermometer input and a 4-wire PRT/RTD input with an accuracy of plus-or-minus 0.02 degrees Celsius. It also has a reference sensor control to minimise the effects of the axial gradient when a reference PRT is aligned with short sensors.
# # #
Contact Fluke Calibration
For more information about the Fluke Calibration 9190A Ultra-Cool Field Metrology Well, visit: www.flukecal.com/9190A. To purchase, contact contact Fluke Australia, Locked Box 5004, Baulkham Hills, NSW 2153, call (02) 8850-3333, fax (02) 8850 3300, or e-mail firstname.lastname@example.org
About Fluke Calibration
Fluke Calibration is a leader in precision calibration instrumentation and software for electrical, temperature, pressure, flow, and RF measurements. Calibration products from Fluke Calibration are found in calibration facilities around the world, including National Metrology Institutes, that demand the highest levels of performance and reliability, backed by state of the art metrology and uncompromising support. They are relied on by quality engineers, calibration technicians, and metrologists to instill confidence in the measurements that are critical to their organisations for quality, safety, reliability, and cost.
Fluke and Fluke Calibration are trademarks of Fluke Corporation. The names of actual companies and products mentioned herein may be the trademarks of their respective owners.